(Item Code: Spiral)
We develop an international variety of "SPIRAL" Storage tanks for chemicals. These tanks are manufactured by unique process of "Winding"These chemical storage tanks are manufactured by Chemical Grade imported and 100% virgin raw Material both in HDPE/PP and are durable enough to withstand extreme service environments and harsh outdoor weather. Each tank is Fabricated by means of imported welding gun. This tanks will not leak, rust chip or corrode. We manufacture Spiral Tanks from 500 Ltrs to 60,000 Ltrs capacity. Spiral Pipes are available from Ø 300 mm to Ø 3600 mm.
(Click on Image to Enlarge)
We Offer:
- HDPE Spiral Tank (500 Ltrs to 50,000 Ltrs)
- PP Spiral Tank
- Spiral Tank
- Spiral Plastics
- Spiral Pipe (Ø 300 mm to Ø 3600 mm)
SILENT FEATURS:
- H.D.P.E. / P.P Sleeves Irrect By Sprial Wind Processon Med Rull
- Resistant High Temperatures
- Higher Resistance Against Chemical And Corrosion & Toxic Elements
- Extremely Light In Weight, So That Easy To Move & Install
- Resistance To Abrasion
- Resistance To W Degradation And No Elecrolytic.
- Flexibility
- With Fitting Like Flanged Inlets L & Outlest Float Level Indicator Man. Hole & Its's Cover Etc. As Per Customer's Requirment.
- Resistance To High Temperatures
- Polyprolene-40 To 1200c
- H.D.P.E – 40 To 900c
|
VARITIES :
- Vertical Profile Tank
- Horizontal Profile Tank
- Rectangular Profile Tank
- Conical Bottom Profile Tank
- Other Item Like
| |
- Scrubbers
- Pipelining
- Effulenttreatment Profile Tank
- Reaction Vessels With Agitators, Stiffners For - Steampipe,
- Thermo Pocket |
|
 |
| |
| PROPERTY |
TYPICAL VALUE |
UNIT |
TEST METHOD |
| Density |
0.96 |
g/cm3 |
ASTM D1505 |
| Tensile Strength at Yield |
24 |
Mpa |
ASTM D638 |
| Elongation at Break |
800 |
% |
ASTM D638 |
| Tensile Modulus of Elasticity |
750 |
Mpa |
ASTM D638 |
| Flexural Modulus (initial) |
970 |
Mpa |
ASTM D790 |
| Notch Impact Strength |
36 |
kg. m/m2 |
ASTM D256 |
| Durometer Hardness |
63 |
Shore D |
ASTM D2240 |
| COEFFICIENT OF LINEAR EXPANSION |
1.38 x 104 |
oC |
ASTM D696 |
| Heat Distortion Temperature |
78 |
oC |
ASTM D648 |
| Environmental Stress Cracking |
250 |
hours |
ASTM D1693 |
| Resistance |
|
|
|
| Brittleness Temparature |
<-100 |
oC |
ASTM D746 |
| Crystaline Malting Point |
130 |
oC |
Dsc |
|
| |
|
 |
 |
|
(Item Code: Spiral) 
We Offer:
