JET FIBRE PUMP manufactures High Density Polythylene pipes through Extrusion Process using Virgin H.D.P.E. Granuales. These pipes are manufactured as per specifications of BIS , IS 4984 – 95 DN 20mm to DN 400mm & PN 2.5 to PN 16kg/cm2 and available with ISI Marks. We manufacture these pipes under our License No. CM/L : 7145768 and are being widely used in various Industries to handle the flow of water, Liquid chemicals, underground pipelines etc., These pipes are also used in Drip, Sprinkler , Landscape Irrigations Systems, Lift Irrigation etc.,
CHARACTERISTICS OF PIPES
| Corrosion Resistance: |
| Excellent chemical resistance and are not affected unlike conventional pipes by hydrogen Sulphide gases and other corrosive chemicals or corrosive sand around pipe. |
| Tough and Durable : |
| These pipes do not crack or chip off thus saves breakage cost in long run. |
| Light weight & Flexibility: |
| Light weight these pipes saves a lot of money on transportation , handling and installation. Due to light weight again these pipes can be easily dismantled and shifted to different sit location. |
| Long life service : |
| As pipes do not get affected by the atmosphere, life span of a pipe could be more than 50 years |
| Energy Saver: |
| Due to smooth inner surface, the friction loss gets minimized thus saves electricity at great extent. |
| Weld ability : |
| HDPE/P.P. pipes are jointed by butt / fusion welding. |
DIFFERENCE BETWEEN PIPES
“JET” H.D.P.E./P.P. Pipes |
PVC Pipes |
Metal Pipes |
| “JET” Pipes are Life time use in normal working conditions | Not guaranteed | Not guaranteed |
| Light weight & make shandling easy & convenient Saves on Transportation cost. | Light weight though should be handled with upmost care against breakage. | Heavy weight |
| “JET” Pipes are corrosion Resistance Pipe. | Not recommended due to its reactivness. | Not resistant to corrosion |
| More flexible and makes laying of pipes easy even on uneven surfaces. | Rigid | Rigid and unclear surface. Has to be connected with addition joint. |
| “JET” Pipes in smaller diameters upto 90mm are available in single length upto 500 Mtrs | Available only in 5/6 Mtrs. lengths | Available only in 5/6 Mtrs. lengths |
| 100% leak proof and jointing by butt fusion welding than per act and continuous manufactured product. | Most of cases during the time if jointing pipes are minimum leakages otherwise after short time pipe are leakages | Most of cases during the time if jointing pipes are minimum leakages otherwise after short time pipe are leakages |
| “JET” Pipes Strength are Excellent | Very Poor | Good. |
| Smooth internal surfaces ensure very low frictional losses resulting in Energy saving upto 33%. | Poor | Poor |
