Jet Fibre Pumps & Equipments Pvt. Ltd.

Our "JET" Pumps are designed to meet the requirement of a good acid handling pump. Available in a range of Three Models, developed with a main objective of attaining higher levels of corrosion resistance durability & interchangeability. Our "JET" Pumps are designed to meet the requirement of a good acid handling pump. Available in a range of Three Models, developed with a main objective of attaining higher levels of corrosion resistance durability & interchangeability.

"JET" Rubberlined Pumps are simple and reliable & bear a wealth of experience in design & Manufacture.
Our Pump Body & its Rubber Lined Parts are restrict the contact of corrosive liquid. Our Pump is available as a 3 H.P. & 5 H.P. & 7.5 H.P. with minimum 2000 ltr/hr. capacity & working Up to maximum 20 mtr/hour. "JET" Rubberlined Pumps are simple and reliable & bear a wealth of experience in design & Manufacture.

Our Pump Body & its Rubber Lined Parts are restrict the contact of corrosive liquid. Our Pump is available as a 3 H.P. & 5 H.P. & 7.5 H.P. with minimum 2000 ltr/hr. capacity & working Up to maximum 20 mtr/hour.

“JET” PUMPS FEATURES :

Less Expensive & Most ideal pumps than other Pumps like as a P.P./ S.S. Pumps.
No requirement of foundation so easy to installation.
No lay out design cost due to standard dimensions.
Easy to servicing of damaged parts like as a bearing, Impiller, & Casing.
Having maximum lift up solid particles due to open Type Impiller.
Pumps sat on heavy duty iron Channel Frame.

MODEL NO.		“JET” - 90 50 X 32	“JET” - 99 65 X 40	“JET”- 990 80 X 50	“JET”- 999 100 X 65	“JET” 99999 125 X 80
GENERAL	Max Casting Thick		12
	Maxi Impeller diameter	205	260	260	260	260
	Maxi Working pressure	KG/CM2	KG/CM2	KG/CM2	KG/CM2	KG/CM2
	Maxi Test pressure	KG/CM2	KG/CM2	KG/CM2	KG/CM2	KG/CM2
	Work Temp Ratio Cº
	Weight of Bare Pump	+70º	+70º	+70º	+70º	+70º
POWER LIMITS	AT 1440 RPM 1800 RPM 2200 RPM	3 H.P.	5 H.P.	5 H.P.	7.5 H.P.	7.5 H.P.
PUMP SETTING	Shaft end play Maximum	0.05MM	0.05MM	0.05MM	0.05MM	0.05MM
BEARING	Redial Inboard	6306	6306	6306	6306	6306
	Thrust out board	6306	6306	6306	6306	6306
	Lubrication	Oil	Oil	Oil	Oil	Oil
SHAFT DIAMETER	At Impeller	20	20	20	20	20
	Under Sleeve	26	26	26	26	26
	Sleeve O.D.	35	35	35	35	35
	Between Bearing	35	35	35	35	35
	At Coupling	24	24	24	24	24
STUFFING BOX	Bore	51	51	51	51	51
	Depth	55	55	55	55	55
	Packing size	8 x 8	8 x 8	8 x 8	8 x 8	8 x 8
	No. of Rings	Nos 4	Nos 4	Nos 4	Nos 4	Nos 4
FLANGES	C.I. Drilling to Table D, F & ASA DIN NO. 10. As Require.	IS 63921971	IS 63921971	IS 63921971	IS 63921971	IS 63921971

Top